Moreover, the environmental impact of synthetic rubber has been mitigated in recent years through advancements in recycling and sustainable production methods. Innovations such as devulcanization and eco-friendly production practices are helping reduce waste and enhance the sustainability of synthetic rubber materials.
The mica powder of HUAJING has the advantage of extremely narrow particle size, and the particle size specifications are complete, such as: 2000 mesh, 1250 mesh, 800 mesh, 400 mesh, 120 mesh, etc. The skin feeling is exquisite.
When selecting lip-safe mica powder, consider the following
Natural mica powder and synthetic mica powder have differences in production methods, heat resistance and color transparency. As the name suggests, natural mica powder is made from natural mica ore after processing, retaining the original characteristics and composition of the ore. Its main components are SiO2 (about 49%) and Al2O3 (about 30%), while also containing K2O+Na2O (9%-11%) and so on. The synthetic mica powder (such as fluoroglogopicite powder), is the use of a variety of raw materials through high temperature reaction and other chemical methods synthetic, its composition and characteristics can be adjusted and optimized according to the need, the chemical formula is KMg3(AlSi3O10)F2, belongs to the monoclinic crystal system, is a typical layered silicate, relatively single and pure composition. The heat resistance of natural mica powder is generally 500-600℃, and some types, such as phlogopite, can reach 800℃. The heat resistance of synthetic mica powder is more excellent, and it can withstand high temperatures above 1200℃, and the melting point or crystallization temperature is about 1375±5. The transparency of natural mica powder is relatively low, and the color is diverse, including black, yellow, white, gray, green, brown and other colors, and may vary due to different ore types and processing methods. The color of synthetic mica powder is relatively single, usually colorless transparent or white, high whiteness, good optical performance, and high transmittance from ultraviolet to infrared band.
A group of parallel cleavages can be seen in a photograph of biomica under orthogonal polarized (left) and single polarized (right) mirrors.
In addition, lepidolite and ferrolepidolite can also be used as mineral raw materials for extracting lithium.
At its core, cosmetic pigment powder is a fine substance consisting of colored particles that are used to create various beauty products, including foundations, eyeshadows, blushes, and lip products. Pigments are categorized into organic and inorganic types, each possessing unique properties that influence color intensity, opacity, and stability. Organic pigments, often vibrant and lightfast, are typically derived from carbon-based sources, while inorganic pigments, such as iron oxides and titanium dioxide, are known for their excellent coverage and safety for skin application.
The common characteristics of mica group minerals are: layered silicate minerals, monoclinic crystal system, a few trigonal crystal system, the crystals are pseudo-hexagonal columnar, plate and sheet; The aggregate is scaly and foliaceous. It has a set of extremely complete cleavage, along which it is easy to peel into sheets. Therefore, the shape of mica is usually regarded as sheet.
Later, with the development of science and technology, people gradually realized that mica minerals have high insulation, high temperature resistance, strong acid and alkali resistance, and mica also began to enter building materials, fire, plastics, paper, rubber, pearlite pigments and other industries. These are mainly Muscovite and phlogopite.
It is an indispensable and important raw material in the fields of electric heating equipment, wire and cable, aerospace and so on.
X represents large interlayer cations, such as K+, Na+, Ca2+, Ba2+, Rb+, Cs+, etc. Y represents octahedral cations, such as Al3+, Fe2+, Mg2+, Cr3+, Ti4+, Fe3+, etc. Z is mainly Si4+ and Al3+; The ideal ratio of the additional anion (OH)- to (O)2- is 2:10, and (OH)- can be replaced by F- and Cl-. Most mica contain 4% to 5% water. Therefore, although they may be called mica, the chemical composition of different mica may be very different, for the purpose of research, we collectively refer to the minerals with this type of characteristics as mica group minerals.